Cut Belts and Screw Compressors
2009-09-17 16:14:00 Dear Gentlemen, we have 4 screw compressors driven by motors using belt, for sudden all compressors belt are cut at same period every day one belt is cut now we reach to stage that there is no more stock and tow compressors are down, so what do you think the reason behind it.
Air Compressors
2009-08-31 05:44:00 Hi, I do understand that a filter, regulator and a lubricator is always interposed between the raw air from the distributing system and the machine that actually consumes the air. I do know why a filter and a regulator is needed. Why is there a need for a lubricator? Could someone please
Air Compressors
2009-08-27 02:13:00 What is the difference between a medical air compressor and a medical breathing air compressor?
Industrial Compressors
2009-08-10 12:00:00 how does compressors work?, wat are their industrial applications?, wat is the purpose of it?
Vendor drawing - pumps and compressors
2009-07-24 16:25:00 What are the different things which a layout engineer require in a vendor drawing of pump??? I mean what should a layout engineer look for in a pump vendor drawing. Also, the same question for compressors.
Conditioning and Monitoring Checklist for Compressors
2009-07-20 09:11:00 Hello friends ,, I need help of the compressor master now.... can you please give me a standard Conditioning & Monitering checking sheet which was usfull for all type of compressor... in daily reporting ???? thanks in advance.... BHargav Thakkar
Rotary Compressors
2009-07-17 02:14:00 Have a Champion Ci55 Rotary compressor. Have just change all internal bearing. Very careful of gap settings. But when started will not go above 40psi. Any ideas???
Tip Speed and Centrifugal Compressors, Blowers and Fans
2009-07-08 07:34:00 What is the important of Tip speed for the selection of subject items ?? What is the limit of Tip speed for Impeller of Compressor/Fan/Blowers ?? Tip speed is direcly related to Diemeter and speed. Diff. vendors have diff. combination of both Speed and Diemeters of Impeller that re
Rotary Air Compressors and Reciprocating Air Compressors
2009-07-06 15:21:00 Can any one say typical compression ratio (Ambient Air) of Rotary air compressor & reciprocating air compressor.
Tips Speeds and Centrifugal Compressors, Blowers and Fans
2009-07-06 14:03:00 Any one can tell me what is the importance of Tip speed for the selection of subject items !! (Diff. vendors have diff. Tip speed respect to Operating speed, Impeller diameter) Tip speed - Centrifugal Compressor/Blower/Fans. Is it an important factor to be considered while selecting Centrif
Suppliers of Atomizing Air Compressors
2009-05-28 14:41:00 Can anyone recommend suppliers for gas turbine atomizing air compressors, similar to an Atlas Copco SC-6
Ammonia and Liquid Jet Compressors
2009-05-14 14:07:00 My question is: What will be the temperature of ammonia exiting a cylinder after perform work on the piston, when we use one Liquid Jet Compressor and pressured water as motive fluid to pull the ammonia out, from the cylinder. The inlet valve of the cylinder (A or B
Refrigeration and Hermetic Compressors
2009-04-29 06:36:00 Why some refrigeration hermetic compressors has five tubes and others only three. what Operational reason justifies it ?
Advantages and disadvantages of water injected screw air compressors
2009-04-17 04:41:00 I would like to know what are the disadvantages of a water injected screw compressor. I have been told that there is a very low life of the screw airend (Element)
Water Injected Screw Compressors - Pros and Cons
2009-04-17 04:41:00 I would like to know what are the disadvantages of a water injected screw compressor. I have been told that there is a very low life of the screw airend (Element)
Driving Compressors with Electric Motors or Diesel Generators
2009-04-10 13:23:00 Dear All Gurus, I have visit a plant which is generate thier own power supply by Disel Generators( parallel operation ) to run 3 units of 522Kw electrical drive centifugal compressor. My concern is if i change the electrical drive motor to disel engine which couple directly to comp
Compressors and Modbus Communcations
2009-04-08 14:48:00 We are using 3 no. of IR Nirvana Screw Compressors IRN 160K 2S CC. we tried our best to communicate these with PLC using Modbus communication by using IRI Intellysis remote Interface Unit. We were unable to read data continuously from all the three compressors at a time. Please any one suggest how
surging in compressors
2009-03-26 11:30:00 Can any one explain why in centrifugal compressors due to surging the impeller rotates in backward direction, but it never happens in the case of centrifugal pumps. RAGESH
Chillers and Compressors
2009-02-24 07:09:00 i got confused with istallation of air cooled chiller 2 horizontal screw compresors 5000kg (Dunham bush AFHX 115T).The chiller located on the slab(10ft x 16ft).The chiller unit come with spring isolator. But during my installation at site, i use rubber pad (3/8" thickness) instead of spring isolator
Repairing Scroll Compressors
2009-02-09 16:29:00 I need advice on how to repair scroll compressors. I have two that seized after the outer casing ruptured and the oil wasted away.
Reciprocating Compressors
2009-01-31 12:31:00 Hello All, Can anybody inform me about the difference between a single acting reciprocating compressor and a double acting one,please help by providing literature for the same as well. Thanks and Regards, Shirin Pathak PUNE MAHARASHTRA,INDIA
How to Test Air Compressors
2009-01-07 13:15:00 I appreciate if someone can suggest the testing procedure for air compressors before the despatch from the suppliers works, whose performance guarantees are free air delivery in terms of cum/hr & pressure in kg/cm2 and power consumption.
Tiny Air Compressors
2009-01-05 16:21:00 I've been making RC cars and helicopters for awhile now, and Im think of adding an air compressor for shooting plastic "bb's" on one of my humvee type cars. (RC battles) Not quite sure of what but around 2 1/2 by 2/12 inches. (If that's possible, It can be bigger) I haven't found anything on the web
Compressors, Cylinders and Specific Heat Capacity
2008-12-23 06:49:00 My question is about the external work of compression and the legendary cylinder's "specific heat capacity" Here is a question in case someone here understands thermodynamics, especially the thought experiment I will call the "legendary cylinder". I'm trying to understand how the l
Air Compressors
2008-10-15 08:32:00 how to install 2 units of screw type air compressor efficiently. we are now encountering huge pressure loss now on our plant..one thing the technician noticed is the connection with "T" going to the main tank..he advise to install "headers" to increase the system pressure..as of the moment the two c
Water in Fuel Lines in Rotary Screw Air Compressors
2008-10-13 09:11:00 I am using an rotary screw air compressor; and I am using a refrigerated air dryer. The problem ia thst of recent I am getting water in the lines. I have changed the moisture trap, but the problem has persisted. what could be the problem?
home made compressors.
2008-09-04 03:56:00 Is it possible to build a compressor using a small engine as a base structure and somehow reworking the head , valve train etc. ?
Rotary Screw Air Compressors
2008-08-21 18:37:00 Does anyone know a Design Engineer who is familiar with rotary screw air compressors? If so, I would like to be introduced. This is a very unique skill, so I figured that I would start here.
Acoustic Fundamentals for Reducing Pulsation in Air Compressors
2008-06-05 08:34:00 Hi friends, I started my project on Reducing pulsation in Air compressor for that purpose I require basic of acoustic fundamental so please give me some suggestion which material is good for my purpose?
Screw-Type Compressors for Ammonia Refrigerants
2008-05-07 12:54:00 I want to know more about Screw type Compressor machines specifically for Ammonia refrigerant.
WATER COOLED AIR COMPRESSORS
2008-04-25 18:43:00 PLEASE TELL ME HOW TO REDUCE CARBONISATION IN AIR COMPRESSORS WHICH ARE WATER COOLED AND IS THERE ANY SOLVENT WHICH CAN BE ADDED TO FRESH WATER THAT IS CICULATED IN THE CYLINDER JACKETS AND THE INTERCOOLERS SO THAT THE SCALE FORMATION CAN BE MINIMISED
Air compressors air pressure out of the compressor itself???
2008-03-16 01:58:00 I'm have a problem with my air lift system on my vehicle the small compressor that came in the kit is not producing more than 9lbs of air to the air shocks?? With my regular compressor I can deliver the desired air pressure to the air shocks but was wondering how much pressure is suppose to
Some Types Of Portable Air Compressors
2008-02-25 07:32:00 The portable compressors do vary in their size and according to their performance power. There are various types of compressors that are available and the choice depends on what tools you would be using. You must first check the strength of your tools and then select the model which would suit them the most.Check Full Article
Some Types Of Portable Air Compressors
2008-02-08 09:52:00 The portable compressors do vary in their size and according to their performance power. There are various types of compressors that are available and the choice depends on what tools you would be using. You must first check the strength of your tools and then select the model which would suit them the most.Check Full Article
Some Types Of Portable Air Compressors
2008-02-04 20:12:00 The portable compressors do vary in their size and according to their performance power. There are various types of compressors that are available and the choice depends on what tools you would be using. You must first check the strength of your tools and then select the model which would suit them the most.Check Full Article
Some Types Of Portable Air Compressors
2008-02-03 00:21:00 The portable compressors do vary in their size and according to their performance power. There are various types of compressors that are available and the choice depends on what tools you would be using. You must first check the strength of your tools and then select the model which would suit them the most.Check Full Article
Air Compressors .
2007-12-28 17:38:00 Can any one help in the matter that if the compressors are delivering much mositure / water in the line .Despite of having DDp , Qd filters at the delivery of the line .What is the cause and what preventive action we can take to omit the same .The lines are divided in to Mill Air without Dyer and In
Air Compressors
2007-12-27 12:11:00 Dear sir, For our molten metal atomization process,we are looking for air compressors with pressure to a maximum of 15 bar and air volume at around 700 c.f.m.with power approximately 150 Kw.Kindly suggest us a suitable compressor (screw or reciprocating)for our application.
Output of compressors connected in series.
2007-12-20 16:18:00 Say you have two identical single stage piston compressors rated at 100psi and 100cfm each. When connected in parallel they will deliver 200cfm at 100psi. If you connect them in series will they deliver 100cfm at 200psi.
1 job/day: Rotating Equipment Engineer, Pumps - Compressors (December 11, 2
2007-12-11 16:44:00 1 job/day from Oil Offshore Marine - Find Rotating Equipment Engineer Jobs Rotating Equipment Engineer, Pumps - Compressors - read the job description and apply online with 1 single click.
Rotary Vane Compressors - need links to sites with information plus view in
2007-12-09 14:47:00 I would like to look inside of a rotary compressor as I need some schematics, diagrams within the compressor. Information on regarding working temperatures will also be useful.
Pneumatics and Compressors India | Air, Gas cylinders, Actuators, Motors
2007-11-23 00:00:00 Pneumatics and Compressors - Actuators, Rotary, Gas, Motors, Fluids, Cylinders, Turbines Systems, Spares Parts, Components, Blowers & Air Handling Systems.
DENYO Industrial Diesel Generators & Compressors
2007-10-07 18:32:00 Product/Service NameWASP Diesel, Denyo's Exclusive Australian Distributor of Industrial Diesel Generators.Function/Application-sDENYO is reowned for providing superior Diesel Generators and Compressor products to over 130 countries worldwide. Diesel Generators ranging from 6kVA - 1100kVA, and Diesel Compressors from 50CFM - 1300CFM means Denyo provides a product to suit any Industrial or mining application.Established in 1948, Denyo has grown to become one of Japan's most reputable and Largest industrial equipment manufacturers. Quality, Dependability and Efficiency are the driving force behind Denyos' range of Industrial Equipment. Each Generator and Air Compressor derive from unrivalled production quality and control, whilst utilising the highestquality components and materials. If it is Heavy Duty you require, youwill not find a better product than Denyo.Differentiating Features Diesel Generators ranging from 6kVA - 1100kVA Single & Three Phase units available Super Silent ...
ToolKing.com - Sales & Clearance on Compressors, Power Washers & Generators
2007-09-19 08:19:00 Read Original Post Here Technorati search: closeouts coupon-codes discount-coupons good-bargains Share This
Test Bench Needed for Pumps, Compressors and Governors - Please Suggest
2007-09-13 11:16:00 Please can any one of us recommend reliable Test benches for the following: 1. Engine Governors 2. Diesel Fuel injection pumps of between 4...
Frictionless Compressors [Digg]
2007-07-31 07:16:00 Compressors that run on frictionless bearings are an enticing prospect. Dan Foss Turbocor, Inc. is now marketing a line of compressors that use magnetic bearings to provide essentially frictionless operation. These compressors have been on the market for about three years, and now McQuay International is incorporating the compressors into their new
Compressors
2007-07-23 19:21:00 Compressor HandbookBy Paul Hanlonhttp://mihd.net/btnzowCom-pressors Selection and SizingBy Royce N. Brownhttp://rapidshare.com/file-s/3436309/Compressors_Selection-_and_Sizing_muya.rarCompressors- and Modern Process ApplicationsBy Heinz P. Blochhttp://rapidshare.com/file-s/4504646/CMPA.rarScrew CompressorsBy Ahmed Kovacevichttp://mihd.net/0up94z-A Practical Guide to Compressor TechnologyBy Heinz P. Blochhttp://mihd.net/hkczat
A few Questions About Axial Flow Compressors
2007-06-17 08:01:00 Material used for the construction of axial flow compressor? Which type of blade profile is used nowadays in axial flow compressor? Why...
Compressors and Boosters for Drilling
2007-05-03 11:11:00 Drilling in Total Losses and Problems Anticipating: Drilling 17 ½" vertical holes to the depth of 1000 meters with air and foam. What ca... |
|
 |
|
 |
