|
Flow Meter Configuration
2012-01-12 20:27:00 what are the parameters need to configure in Ultrasonic flow meter (Gas and Liquid), Magnetic flow meter and vortex flow meter? Thanks in advance.
Pin Configuration of Ethernet Cable Connector RJ45
2011-12-08 14:00:00 Dear all We are working for a project where we will connect all the 10 Allen Bradley Compact Logic PLCs of a Corrugator machine through a LAN network. The pin configuration during installation of RJ45 connector is as mentioned in below picture. Please assist if it is ok? Any more instruction?
NPN, PNP or Namur configuration
2011-12-02 00:02:00 I am working on a project that will use a flow meter connected to a flow batcher. The flow meter can be ordered with an NPN, PNP or Namur configuration. I was wondering what the differences are and which one would be the best one for me to use?
Minimum energy configuration for free-to-move magnets
2011-11-26 18:43:00 Three very short (near point) free-to-move bar magnets are placed near each other in 3D. What is the minimum energy configuration?
Server Naming and Configuration Conflicts
2010-06-05 14:59:00 In my work with clients the topic of how to handle the movement of software from one environment to another inevitably comes up. Sometimes this is in the context of NServiceBus but the problem is more generic. The faster that an organization is able to get software out the door, the more agile they can ...
Minimal Apache Web Server httpd.conf configuration file
2009-12-09 20:53:00 Following an install of Apache on Windows you are faced with the somewhat daunting process of wading through the httpd.conf file and deciding upon what is required for your particular circumstance. As a matter of course, I typically save the default httpd.conf file to another name and use a vastly trimmed down variant in place thereof. What I have pasted below represents such an example and trims the config file to a much more manageable 55-lines of code having stripped the unnecessary elements along with all of the comments. PidFile logs/httpd.pid Listen 80 ServerName localhost ServerTokens Prod ServerSignature Off FileETag None UseCanonicalName Off HostnameLookups Off AddDefaultCharset IS-8859-1 ServerAdmin webadmin@localhost ServerRoot "c:/www/Apache22" DocumentRoot "c:/www/vhosts/localhost" Timeout 45 KeepAlive On KeepAliveTimeout 15 MaxKeepAliveRequests 100 ThreadsPerChild 150 MaxRequestsPerChild 1000 ErrorLog logs/error.log LogLevel error LogFormat "%h %l %u %t "%r" %>s %...
CBT.NUGGETS.MICROSOFT.SYSTEMS.CENTER.CONFIGURATION .MANAGER.EXAM-PACK.70-40
2009-11-11 03:40:00 CBT.NUGGETS.MICROSOFT.SYSTEMS.C-ENTER.CONFIGURATION .MANAGER.EXAM-PACK.70-401-AGWou-ldn’t it be great to configure an entire system-wide OS deployment from your workstation?Microsoft Systems Center Configuration Manager (SCCM) gives you that power.The old SMS 2003 won’t let you configure Windows Vista and Longhorn Server.SCCM 2007 will, and boy is it making large-system configuration easier to
Convention over Configuration ? The Next Generation?
2009-08-15 20:13:00 Convention over configuration describes a style of development made popular by Ruby on Rails which has gained a great deal of traction in the .net ecosystem. After using frameworks designed in this way, I can say that the popularity is justified – it is much more pleasurable developing this way. The thing is, when looking ...
gear configuration
2009-07-01 19:15:00 I'm looking for a vertical to horizontal gear configuration,Taking off from a small motor shft... How do I refer to this as? Any insight as to who will have?
roofing configuration question
2009-06-07 06:44:00 I am doing an addition for a single story, single family, ranch style house in California. I am exploring doing a hip roof that is adjacent to a gable roof and this gable roof is adjacent to a hip roof, creating 3 peaks that will cover 3 different projections from the main area of the house. The 3
CBT NUGGETS MS SYSTEMS CENTER CONFIGURATION MANAGER EXAM-PACK.7, SCCM 70-40
2009-06-07 00:08:00 Wouldn't it be great to configure an entire system-wide OS deployment from your workstation? Microsoft Systems Center Configuration Manager (SCCM) gives you that power.The old SMS 2003 won't let you configure Windows Vista and Longhorn Server. SCCM 2007 will, and boy is it making large-system configuration easier to understand and deploy. Plus, it lets you configure an OS across your system
Configuration of Cosmic Romance
2009-03-24 00:17:00 1.God says: "I was a Hidden Treasureand I Longed to be Known, Longed to be Loved,so I Manifested the Entire Creation.".....................-....................... - Sacred tradition of Islam2.the wake that originated in the Unknowable Wombwhere the cosmic galaxies dreamt to 'be',where the illusion of time was born,and where all souls of children of Primordial Adamwas honored with divine breath,
Fail-Safe Configuration for Fire and Gas System
2009-02-11 12:14:00 we have separate fire &gas system in large scale plant Is that standard that the Fire & Gas system (F&G system) shall be generally designed to operate on a non Fail-Safe configuration i.e. executive actions shall not be activated on failure of loops and/or systems. and why?
MCSE - Windows Server 2003 - DHCP Server Configuration
2009-01-27 16:26:00 Windows Server 2003 - DHCP Server Configuration
MV Panel Configuration
2008-12-10 19:26:00 Dear all, right now am designing the main voltage panel for one of our project. In that we have proposed three nos of transformer(3 separate ht incoming feder). In this case, can we design single panel(with bus coupler) for all the 3 transformer? r 3 separate mv panels required? any particular rules
How the Telephone Keypad Came About
2008-12-06 01:40:00 Here is an interesting article about how the telephone companies came about choosing the keypad configuration for dialing numbers. Ever wonder who came up with the order of numbers on a telephone? Ever wonder why it isn?t the same as those on a calculator, or a keyboard, ascending from lowest to highest? After all, adding machines ...
By: Factsbuffet.com
what is the configuration of an Electronic Earth pit.
2008-12-03 13:20:00 what is the configuration of an Electronic Earth pit.
Default configuration of serial ports in Windows XP.
2008-11-23 22:20:00 Hello, I am using an industrial PC running Windows XP on my boat. The computer is among other things used for navigation and is connected to GPS and other data sources through NMEA. The computer is equipped with 4 serial ports. If I start the computer (Windows XP) when the datasources are
ASP.NET MVC Routing Using XML Custom Configuration Settings
2008-11-22 23:42:00 In ASP.NET MVC application, you need to add some routing code in the Application_Start of the Global.asax file to define your routing criteria. These lines of code take a shape of configuration settings for the MVC application and I was thinking if we can transfer these configurations line of codes to be XML settings in the web.config file. My target is to make the routing configuration in the web.config file as following:As you can see, the later configurations define the Ignore and Routing lists of the MVC application. In the "Ignore" list, you define the URL criteria to be ignored by the MVC routing. In the "Map" list, you specify a list of the routes including the route name, controller and action. You can also define any optional parameter mappings for your actions. To do that, I have to create a custom configuration section: MvcRouteConfigurationSectin. The section has a IgnoreCollection - inherited from ConfigurationElementCollection- class - of IgnoreItem and another RoutingC...
By: Nour's Space
Heat exchanger configuration - Estimate energy savings
2008-11-21 16:25:00 Good morning everybody. I am a third year mechanical engineering student doing an internship in a heavy truck garage.We have an air exchanger equipped with a rotary heat exchanger and en electrical heating element. The thing is the heating element (we do not have air conditionning, we only use th
Cisco BGP-4 Command and Configuration Handbook
2008-11-06 06:41:00 The comprehensive, hands-on guide to all Cisco IOS(r) Software BGP-4 commands The complete BGP-4 command referenceinvaluable for network designers, engineers, and architects Provides configuration, troubleshooting, and verification scenarios for every possible BGP-4 command supported by Cisco IOS Software that can be implemented on a minimum number of routers Groups BGP-4 commands by area of implementation route aggregation, auto-summary, route filtering, and route advertisement, just to name a fewProvides clear and concise commentary on the initial release, purpose, syntax, and usage of each BGP-4 commandOffers excellent CCIE certification preparation from one of the CCIE Program ManagersIncludes supplementary information on regular expressions, route map logic, and RFC 1771, A Border Gateway Protocol 4 (BGP-4) Cisco BGP-4 Command and Configuration Handbook is an exhaustive practical reference to the commands contained within BGP-4. For each command/subcommand, author Bill Park...
vaulted ceiling insulation configuration
2008-10-10 04:33:00 I am replacing the roof on my house and will take the opportunity to improve the insulation. The cathedral roof is constructed of 2 x 8 rafters on 12" centers strapped with 1 x 4 on 8" centers. The roofing is 18" resawn shakes with 8" exposure on a 1:4 slope. The interior is finished with 1 x 4 t
Use "object" instead of "bean" in Spring Configuration XML
2008-09-03 13:42:00 Spring configuration xml is used for defining the wiring between different object. It has the following format. <beans> <bean id=".." class="..."> ... </bean> ...<beans>Classes specified in the configuration file will be instantiated by Spring container. And those objects will be bound with each other accordingly. Any java class specified under attribute named "class" will be instantiated. There is no much limitations on the classes that can be used for this here. It does not need to be a JavaBean. It can be any POJO (plan old java object). The only requirement is that this class must be possible to instantiate.So why does this tags are named <beans> and <bean>? This seems to be misleading.In Spring one way of binding objects is using the beaness of java classes. But that is not that only way to bind them together, constructor can be used to bind objects. So if configuration file used tags as follows, it would be more mea...
Use "object" instead of "bean" in Spring Configuration XML
2008-09-03 13:42:00 Spring configuration xml is used for defining the wiring between different object. It has the following format. <beans> <bean id=".." class="..."> ... </bean> ...<beans>Classes specified in the configuration file will be instantiated by Spring container. And those objects will be bound with each other accordingly. Any java class specified under attribute named "class" will be instantiated. There is no much limitations on the classes that can be used for this here. It does not need to be a JavaBean. It can be any POJO (plan old java object). The only requirement is that this class must be possible to instantiate.So why does this tags are named <beans> and <bean>? This seems to be misleading.In Spring one way of binding objects is using the beaness of java classes. But that is not that only way to bind them together, constructor can be used to bind objects. So if configuration file used tags as follows, it would be more mea...
Use "object" instead of "bean" in Spring Configuration XML
2008-09-03 13:42:00 Spring configuration xml is used for defining the wiring between different object. It has the following format. <beans> <bean id=".." class="..."> ... </bean> ...<beans>Classes specified in the configuration file will be instantiated by Spring container. And those objects will be bound with each other accordingly. Any java class specified under attribute named "class" will be instantiated. There is no much limitations on the classes that can be used for this here. It does not need to be a JavaBean. It can be any POJO (plan old java object). The only requirement is that this class must be possible to instantiate.So why does this tags are named <beans> and <bean>? This seems to be misleading.In Spring one way of binding objects is using the beaness of java classes. But that is not that only way to bind them together, constructor can be used to bind objects. So if configuration file used tags as follows, it would be more mea...
Use "object" instead of "bean" in Spring Configuration XML
2008-09-03 13:42:00 Spring configuration xml is used for defining the wiring between different object. It has the following format. <beans> <bean id=".." class="..."> ... </bean> ...<beans>Classes specified in the configuration file will be instantiated by Spring container. And those objects will be bound with each other accordingly. Any java class specified under attribute named "class" will be instantiated. There is no much limitations on the classes that can be used for this here. It does not need to be a JavaBean. It can be any POJO (plan old java object). The only requirement is that this class must be possible to instantiate.So why does this tags are named <beans> and <bean>? This seems to be misleading.In Spring one way of binding objects is using the beaness of java classes. But that is not that only way to bind them together, constructor can be used to bind objects. So if configuration file used tags as follows, it would be more mea...
Use "object" instead of "bean" in Spring Configuration XML
2008-09-03 13:42:00 Spring configuration xml is used for defining the wiring between different object. It has the following format. <beans> <bean id=".." class="..."> ... </bean> ... <beans> Classes specified in the configuration file will be instantiated by Spring...
Reusing PV panels in new configuration
2008-08-19 03:22:00 Anybody have an idea for reconfiguring 12V photovoltaic panels to charge a 48V battery bank. These panels would be used mainly for a trickle charge after the bulk charging is done by a genset. Are there MPPT controllers capable of outputting 48V from a 12V 75watt source? Or do I need to
External Value Configuration with IoC
2008-06-13 18:32:00 One of the things I haven’t like about using IoC containers, AKA dependency injection frameworks, was the string-based configuration model they exposed. In order to set these values, developers had 2 options: either use XML config (usually without the benefit of intellisense or refactoring support), or use code (still quoting property names - again, no ...
External Value Configuration with IoC
2008-06-13 18:32:00 One of the things I haven’t like about using IoC containers, AKA dependency injection frameworks, was the string-based configuration model they exposed. In order to set these values, developers had 2 options: either use XML config (usually without the benefit of intellisense or refactoring support), or use code (still quoting property names - again, no ...
External Value Configuration with IoC
2008-06-13 11:32:00 One of the things I haven’t like about using IoC containers, AKA dependency injection frameworks, was the string-based configuration model they exposed. In order to set these values, developers had 2 options: either use XML config (usually without the benefit of intellisense or refactoring support), or use code (still quoting property names - again, no ...
New HP Blackbird 002 configuration ready for retail
2008-06-10 01:45:00 Hewlett Packard is bringing its extreme Blackbird 002 PC rig to retail this summer in an exclusive configuration. It will price around $3,300. The Blackbird 002 will include nice touches like isolated thermal chambers, tool-free accessibility, and cable-free hard drive installation. Key features will include an Intel Core 2 Quad Processor Q9450, ...
By: SlipperyBrick
Fatal: unknown configuration directive ?SQLAuthTypes?
2008-06-02 15:30:00 - Fatal: unknown configuration directive 'SQLAuthTypes' ????????????????????????? FTP ???????????????????????????????-???????????????????????????????-????????????????? CP ????????? service FTP ??? down ???? restart service FTP ????????????????????? Error ??????????????????????? root@ns1:# /etc/init.d/proftpd restart* Stopping ftp server proftpd ...done. * Starting ftp server proftpd - warning: the DisplayFirstChdir directive is deprecated and will be removed in a future release. Please use the DisplayChdir ...
Configuration, part 2: mapping input keys
2008-05-28 21:07:00 In this tutorial I will explain how to remap input keys using an XML file and a configuration dialog box. First of all, here’s the config dialog. I assume you are familiar with the TGB GUI builder for this. Most of the action will take place in the listbox under “Keyboard input”, wich is a GuiTextListCtrl ...
Configuration Management and Change Management
2008-05-27 17:58:00 Configuration Management and Change Management of PSS Online1 Vote(s)
By: JeQQ it
lost configuration
2008-05-22 01:12:00 a) I can figure down why after any complete charge lost (zero, zero dead!!) when I charge again I've lost all screen pictures an protectors. Is it normal? b) Is there any way for reaching the dictionary. I have lots of messy world I never introduced...
By: Fixya.com
Configuration, part 1: XML files
2008-05-19 19:00:00 I finally got a system up and running for setting and storing configuration settings. It wasn’t easy, since many of the functions I had to use weren’t exactly very well documented. Everything works now, so here’s a tutorial on how I did it. I’m gonna start with XML files, since that’s what I use to ...
Asterisk installation, configuration and basic customization by jocknuke
2008-05-08 00:54:00 I am developing a web application that needs to interact with ASTERISK NOW PABX. My preferred environment for the front end is ASP.NET/C# with MS SQL. But I am open to whatever is best to achieve the... (Budget: $100-300, Jobs: .NET, Audio Services, Linux, PHP, Website Design)
openSUSE Hard Disk Configuration Survey
2008-05-07 07:30:00 In order to optimize the YaST partitioner module for openSUSE users the user experience team decided to conduct a small survey to figure out how you deal with hard disk configuration. The survey contains some basic questions and its results will directly influence the redesign for the partitioner module. The survey will be online until ...SHARETHIS.addEntry({ title: "openSUSE Hard Disk Configuration Survey", url: "http://sathyasays.com/2008/05/-07/opensuse-hard-disk-configura-tion-survey/" });
By: Sathya Says
Smarty Variable: Variable at Configuration File
2008-05-03 20:19:00 tutorial php about how to use variable at configuration file for smarty template
Drupal Configuration: Site Maintenance
2008-05-01 16:26:00 tutorial php about site maintenance for drupal configuration
Drupal Configuration: Boosting performance by Caching
2008-05-01 15:01:00 tutorial php about how to set cache and file system for Drupal
Drupal Configuration: Setting Date and Time
2008-05-01 14:57:00 tutorial php about how to set date and time for Drupal
Drupal Configuration: Looking Error Report Log
2008-05-01 14:37:00 tutorial php about how to look error report at Drupal
Drupal Configuration: Error Handling
2008-05-01 14:10:00 tutorial php about how to handle error at Drupal
Drupal Configuration: General Setting
2008-05-01 13:36:00 tutorial php about general setting at Drupal
Drupal Configuration: Login to Administration Page
2008-05-01 13:09:00 tutorial php about how to login to drupal administration page
Tutorial explains Mandriva 2008 configuration
2008-04-24 11:56:00 A step-by-step tutorial on setting up Mandriva One 2008 Spring (Mandriva 2008.1) desktop (GNOME) has been published on HowtoForge.com. Written by Oliver Meyer, the six-page tutorial, called "The Perfect Desktop," covers basic configuration, and then steps through installations for over a dozen Linux applications. Mandriva has been around for awhile, but the distro was substantially updated for the 2.6.22.9 Linux kernel in a Mandriva 2008 release in October.
By: Server Tales
Tutorial explains Mandriva 2008 configuration
2008-04-24 11:56:00 A step-by-step tutorial on setting up Mandriva One 2008 Spring (Mandriva 2008.1) desktop (GNOME) has been published on HowtoForge.com. Written by Oliver Meyer, the six-page tutorial, called "The Perfect Desktop," covers basic configuration, and then steps through installations for over a dozen Linux applications. Mandriva has been around for awhile, but the distro was substantially updated for the 2.6.22.9 Linux kernel in a Mandriva 2008 release in October.
By: Server Tales
|
|
 |
|
 |
