|
Configure Power Management with power.conf
2008-06-11 09:32:00 I had a few (actually more than a few) in-house complaints regarding my personal workstation?s uptime schedule. The complaints were legitimate since the box goes largely unused. With today?s ($137/barrel) spiraling energy costs, I can understand the concern. So to quell the incessant complaints, I decided to better manage its power consumption - modified the /etc/power.conf file.Here is an example.# more /etc/power.confautopm default# Auto-Shutdown Idle(min) Start/Finish(hh:mm) Behaviorautoshutdown 30 9:00 9:00 noshutdownstatefile /export/home/.CPRChanged to: After 20 minutes of non-use, shutdown.# vi /etc/power.confautopm default# Auto-Shutdown Idle(min) Start/Finish(hh:mm) Behaviorautoshutdown 20 0:00 0:00 shutdownstatefile /export/home/.CPR:wq!Let power management know of the change# /usr/sbin/pmconfig
By: My SysAd Blog
Configure your LAN's auto-disconnect time out
2008-05-28 20:07:00 Windows NT can be configured to automatically disconnect idle LAN sessions after a set number of minutes.1. Open your registry ( Start >> Run >>> type "Regedit" >> Hit Enter ).2. Navigate to following key :Key: [HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services LanmanServer Parameters]Value Name: AutodisconnectData Type: REG_DWORDData: 0 to4,294,967,295 (Oxffffffff) in minutes2. Modify the value of 'Autodisconnect' to equal the time in minutes before a session is disconnected. If this value doesn't already exist create a new string value.3. Restart Windows NT.Note: To disable Autodisconnects set the value to 'Oxffffffff'.For more details and latest tips subscribe in the email.Note : This site will not be responsible for any damage( if occured)to your computer while applying this tip.Do it at your own risk.
By: Techskill4all
can't connect to configure password through web address 192.168.0.50
2008-05-21 06:06:00 Dear Sir or Madam, My friend gave me his D-Link DWL-2100AP, H/W Ver: A2 F/W Ver. 2.00. I reset the unit so it can go back to its default settings. I have a wired router in my office (NetGear) that I can connect this unit to one of the pc's that is...
By: Fixya.com
How to configure Zyxel P-600 series with PLDT MyDSL
2008-05-19 10:10:00 This guide will help that will help you enable the routing capabilities of your Zyxel P-600 series router and so you can share your internet connection using a switch or hub. Normally your Zyxel P-600 series router that comes with your PLDT MyDSL plan is set to bridge mode meaning you will not be able to share it to other PC's unless you use a separate router. But using a separate router sometimes have a compatibility issue with Zyxel just like my Linksys router. When I connect my Zyxel to linksys I can share it with my other PC's but the problem my connection automatically drops after exactly 2 hours. I researched for an answer and I found out that Zyxel has a compatibility issue with my Linksys router so I decided to try to configure my Zyxel P-600 to enable it's routing capabilities.Here are the steps that I've successfully done.step 1. You need to set a static IP address on your computer before you can access the web configuration. save settings and reboot.step 2. After r...
By: IT-AID
OCZ Technology Intro DIY Gaming Notebooks ? ?Dream it, Configure it, Create
2008-05-15 12:23:00 OCZ Technology have announced a new ?pioneering? Do-It-Yourself (DIY) Gaming Notebook Program allowing users to purchase unconfigured notebooks and pick and choose components ? from CPUs to memory, to HDD/SSD options, etc ? in a bid to create the gaming notebook of their dreams (or as close as budget constraints will allow) which OCZ Technology will then subsequently professionally assemble on the user?s behalf prior to shipping.
How to configure AdSense sidebar
2008-04-21 13:27:00 If you use layout blogger template you must add Google ads to make money online with blogspot but sometimes, google ads not show. So, how to config Google ads ?Go to HTML convertIn Parse HTML you paste your Google ads code and click Parse.Then copy new code and add into your blogger templateDon't forget to subscribe!
the bookmark to configure the
2008-04-19 10:32:00 the bookmark to configure the wireless part of the printer does not appear on instalation. So I nee a web page?
By: Fixya.com
How to Configure Leopard’s Firewall?
2008-04-14 02:31:00 Leopard’s Allow All Incoming Connections option is the functional equivalent of the old Stop button: it turns your firewall off. I wouldn’t recommend this setting to anyone. The Allow Only... Blog about Mac Computers, Apple Product and Design (from Photography, to Architecture). Embedded videos, apple commercials, photos, news, download links, a lot of tips and tricks, tutorials. Anything you need to make your Macintosh experience UNIQUE!
By: Mac Amour
cpufreqd - How to configure you cpu speed
2008-04-13 08:21:00 cpufreqd is a Linux daemon, that lets you control the speed of your CPU(s), depending on some variables, or also be set manually, you can set it to act dynamically or manually, you can define a lot of profiles and rules, which will control your CPU speed, the variables could be the temperature of your CPU, the amount of charge in your battery if AC is connected or not. First thing you need to do is to install the daemon, in Debian / Ubuntu sudo aptitude install cpufreqd Then you need to check if the desirable modules are loaded, so enter this command: sudo lsmod | grep cpufreq And you should see an output like this: $ sudo lsmod | grep cpufreq acpi_cpufreq 9096 0 cpufreq_stats 5120 0 cpufreq_conservative 6888 0 cpufreq_userspace 4128 0 cpufreq_ondemand 8300 2 cpufreq_powersave 1792 0 freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpuf-req_ondemand processor 31176 2 acpi_cpufreq,thermal Now you are re...
cpufreqd - How to configure you cpu speed
2008-04-13 08:21:00 cpufreqd is a Linux daemon, that lets you control the speed of your CPU(s), depending on some variables, or also be set manually, you can set it to act dynamically or manually, you can define a lot of profiles and rules, which will control your CPU speed, the variables could be the temperature of your CPU, the amount of charge in your battery if AC is connected or not. First thing you need to do is to install the daemon, in Debian / Ubuntu sudo aptitude install cpufreqd Then you need to check if the desirable modules are loaded, so enter this command: sudo lsmod | grep cpufreq And you should see an output like this: $ sudo lsmod | grep cpufreq acpi_cpufreq 9096 0 cpufreq_stats 5120 0 cpufreq_conservative 6888 0 cpufreq_userspace 4128 0 cpufreq_ondemand 8300 2 cpufreq_powersave 1792 0 freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpuf-req_ondemand processor 31176 2 acpi_cpufreq,thermal Now you are re...
Configure Gmail On Your Mobile Phone
2008-04-12 23:20:00 Here is the short tutorial which allows your to configure Gmail Account on N95: (IMP: You must enable POP3 access of Gmail Account. Hint:Look inside Setting and POP forwarding Options on gmail web site) Open Messaging Application Goto Mail box. It asks you ‘No mailbox defined. Define now?’, Choose Yes. Mailbox setup wizard will start. Press start to ... SHARETHIS.addEntry({ title: "Configure Gmail On Your Mobile Phone", url: "http://www.fonearena.com/blog/-2008/04/13/configure-gmail-on-y-our-mobile-phone.html" });
Configure Belkin wireless usb adapter 9050 to a mac G4
2008-03-24 22:39:00 How to configure a Belkin 9050 wireless usb adapter to work with an apple mac G4 Sunflower OSX 10.4.8. I get it to link with the wireless router but can not ping anything or get an ip address.
By: Fixya.com
configure 9050 wireless usb adapter
2008-03-24 22:36:00 configure 9050 wireless usb adapter to work with a apple mac G4
By: Fixya.com
Unable to configure SAMSUNG 3241D TV with ONKYO remote (RC-608M)
2008-03-20 05:09:00 Hi, I have ONKYO remote "RC-608M" that I comes with ONKYO receiver HT-R 530. I am unable to configure my SAMSUNG TV 3241D with it. Please share the remote code for the same.
By: Fixya.com
How to configure Pidgin to work with Google Talk
2008-03-15 12:17:00 Pidgin is an instant messaging program for Windows, Linux, BSD, and other Unixes. You can talk to your friends using AIM, ICQ, Jabber/XMPP, MSN Messenger, Yahoo!, Bonjour, Gadu-Gadu, IRC, Novell GroupWise Messenger, QQ, Lotus Sametime, SILC, SIMPLE, MySpaceIM, and Zephyr. Pidgin can log in to multiple accounts on multiple IM networks simultaneously. This means that you can be chatting with... To read this full article, other contents, and more, visit www.techx.co.nr
By: Tech Guru
Configure Parental Controls in Windows Vista
2008-03-14 07:14:00 Parental controls are a great first step to keeping children safe online. To configure Parental Controls your computer must be set up with at least one password-protected administrator user account.To Set up parental controls 1- Log in to a user account that has administrative privileges.2- Click the Start button, choose Control Panel, and click Set up parental controls for any user.3- You come to a page that shows the name and picture for each user account you?ve created Click the user account for which you want to set up parental controls. To Define Web restrictions1- To define Web restrictions, click Windows Vista Web Filter.2- There are many ways to block Web content. The first step is to choose the first option, Block some websitesor content.3- To define specific Web sites that the user can view, select " Only allow websites which are on theallow list". 4- click "Edit the Allow and block list". Under the Website address heading, type or paste the URL of a single site and the cl...
[Tutorial] Configure sua Internet na Velocidade Mxima
2008-03-09 20:28:00 Para os que no sabem o Windows XP reserva 20% da largura de banda disponvel, ou seja, (20% da velocidade da sua conexo com a Internet) para si prprio e sendo assim voc nunca atingir a velocidade mxima que a sua Internet capaz de fornecer neste sistema operacional. Ento neste pequeno tutorial com fotos, vou ...
Install and Configure FreeRadius with MySQL
2008-03-09 12:08:00 To complete my previous post about Creating Mikrotik User Manager, now I'd like to share a little information about installing FreeRadius with MySQL and how to configure it. And like the other post i have, i try to make it in the simple and fast way with example screenshot . My sample OS today is Fedora. Install FreeRadius with MySQL An easy way to install a new FreeRadius supported to our
By: infodotnet
Configure NAT Using Port Address Translation on a Cisco Router Posted By :
2008-03-06 18:03:00 In this brief article, veteran IT guy Don R. Crawley explains how to configure Port Address Translation on a Cisco router in four simple steps. More: continued here
Configure your startup programs in Windows Vista
2008-03-02 04:38:00 You can do this by editing the startup list using the System Configuration utility. You can do this by typing system configuration or msconfig in the Start Menu search field and press enter.Once this opens up you will be able to see several tabs: General, Boot, Services, Startup and Tools. Click on the Startup tab and you will see the programs that are loaded at each Windows startup.Now from the list you can choose whatever program you want to disable or remove from startup list. Its better you don't disable any important system components or drivers. This might damage the functionality of the operating system. If you are not sure on what you are doing it is better not to disable any startup programs.If you still want to proceed and disable unwanted startup programs, then just uncheck the small box from the left side of the appropriate programs. After you have done, click Apply and/or OK.After then it will ask you to restart,you can choose accordingly...Once you reboot you will be ...
"Can someone please tell me why I can configure and order a pizza online an
2008-02-24 03:06:00 ?Can someone please tell me why I can configure and order a pizza online and have it delivered to my house in 30 minutes, but I can?t get an HMO referral form from my doctor without making four phone calls and have no confidence that the referral will get where it?s going without making a fifth call?? - Kathy Frederick,The Junk Drawer
Configure your BMW 1-Series
2008-02-23 19:49:00 The arrival of the BMW 1-Series is right around the corner at USA dealers and there is a lot of anticipation about this new line. Dealers tell us that their pre-order lists are large and a ton of people are calling asking when they can test drive one. So we thought it would be cool to ask, ...
Configure your WordPress Permalinks
2008-02-20 11:37:00 WordPress is highly customizable, with add-ons such as themes and plugins - but it comes out of the box with many features that can be customized without downloading additional files or having a PhD in computer science. One of the easiest tweaks for WordPress is the permalinks feature - the permanent links to your individual ...
By: thepinkc
Install and Configure Bandwidthd - Per IP Bandwidth Monitor
2008-02-17 03:24:00 It is important to know traffic usage of your client if you're a Linux network administrator. You can monitor your client in text mode, graphic mode or html exported like mrtg, cacti or bandwidthd and one of my favorite bandwidth monitor is bandwidthd. You don't need any database or snmp connection to monitor all of your client on bandwidthd, all you need just libcap, libpng, libgd and apache
By: infodotnet
How To Configure Remote Access To Your Ubuntu Desktop
2008-02-14 22:10:00 This guide explains how you can enable a remote desktop on an Ubuntu desktop so that you can access and control it remotely. This makes sense for example if you have customers that are not very tech-savvy. If they have a problem, you can log in to their desktops without the need to drive to their location. I will also show how to access the remote Ubuntu desktop from a Windows XP client and an Ubuntu client.
By: Server Tales
Configure your dynamic IP to download in Rapidshare
2008-02-13 20:34:00 In your windows: Go to Start > Run and then type cmdOn Command prompt type as follows:type > ipconfig /flushdns ipconfig /release ipconfig /renew exit If you Ip address as alloted by your ISp id dynamic then this will work.
Chinese Experts Configure Attack on Taiwan, Study Says
2008-02-12 14:59:00 China is preparing for an eventual cross-strait showdown with Taiwan and may be prepared to use tactics that could stop the United States from getting involved, according to an analysis of publicly available information on China’s military by the RAND Corporation. According RAND, China’s defenses, the Peoples Liberation Army (PLA), has identified the U.S. military’s reliance on information systems as “a significant vulnerability that, if successfully exploited, could paralyze or degrade U.S. forces to such an extent that victory could be achieved” against Taiwan. Read More…
By: 1913 Intel
manage and configure
2008-02-11 23:12:00 It surely is hard to keep up with the technology today. It seems like it is always innovating every day! The latest cellphone that you bought later on would be obsolete cause...
How to Configure Firefox to free Proxy server
2008-02-09 17:49:00 A proxy server serves us mainly in two ways - It increases the network speed of our internet connection and hides our identity by hiding our IP address. A proxy server (not every) save information and files that are requested by many other proxy users in a special database called "cache". When you request a web page behind a proxy, the proxy server first look into these "cache" and if the same information is found you will get it without a delay. An anonymous proxy server hides our IP address and hides information about us and our interests. It is useful, for example, to overcome some restriction on users from certain countries, cities, geographic regions or even restrictions on some IP address. So a proxy can be used for browsing blocked sites like Flickr, MySpace or YouTube, etc.Here is an example to use a free proxy server with Firefox. Firstly get a list of free proxy servers from here or hereThen choose an IP address and port address from the list (example: 220.227.64....
By: Techtrends
Configure Windows Vista to log you on to a Standard User Account
2008-02-09 03:01:00 Here is a simple tip to automatically login a user. Click on the Start orb and type netplwiz (Advanced User Accounts Control Panel) in the Instant Search Field. On the Users tab, uncheck the Users must enter a user name and password to use this computer. Click the Apply Button and the Automatically Log On button appears for you to enter the User name and password information. After entering
Install and configure Windows xp Server 2008 core in this new operating sys
2008-02-06 14:02:00 With the imminent launch of Microsoft Windows Server 2008 coming on February 27, 2008, I want to show you a feature I am fond of in this new operating system. With Windows Server 2008, you have the option of performing a Windows Server Core installation, which provides you with the minimum set of tools to run Windows. You are provided with a kernel and a command line to manage the server. It is
Vector, Cool, Functional and Easy to Configure
2008-02-06 12:18:00 Packed with a whopping 12 module positions, this is the perfect template for anyone with a content rich website. It ensures ease of navigation for users.As for the usual high quality specifications from JoomlaJunkie - Vector is fully XHTML and CSS validated and compliant, optimised for SEO. The CSS is fully described and detailed, and has been tested in Firefox 1.5 / 2.0, IE 6 / 7, Opera, Safari and Flock. More details have been added to the website typography, sidebars and the user modules are fully collapsible. An instant search facility and out-of-the-box installation make Vector a great choice for the those who want to up and running as soon as possible.Demo | Purchase
How To Configure ISP Mail Server With Virtual Users/Domain On Centos 4.5 Us
2008-02-05 08:41:00 This tutorial describes how to set up a mail server where Postfix is the SMTP service, and Dovecot provides IMAP and POP services. The users are virtual and user information is stored in a MySQL database.Pre-Configuration Requirements:1. Hostname cnode1.rnd.pk with IP address (172.16.4.80) to eth0. (You can assign an IP address and hostname of your choice.)2. Create an alias eth0:0. Assign IP address (172.16.4.81). (You can assign an IP address of your choice.)3. Make entries of your hostname and IP in /etc/hosts . In my case my /etc/hosts file shows127.0.0.1 localhost.localdomain localhost172.16.4.80 cnode1.rnd cnode1172.16.4.81 mail.rnd mailInstallation Of Required Packages:We need the following packages for our mail server to be installed:dovecot-0.99.11-8.EL4- (with database support), postfix-2.2.10-1.1.el4.centos.m-ysql (with database support) and squirrelmail.1. First install dovecot. If you install postfix before dovecot, then dovecot will not be installed on your system becaus...
How to configure PPPOE mode in UT300R2U, WA3002G4 adsl routers for BSNL DAT
2008-02-02 11:31:00 Recently Huawei MT 880 adsl router's are not working in PPPOE mode. It is working in Bridge mode only. For multiple computers using the same internet connection, we can configure PPPOE mode very easily. But Bridge mode configuration is little bit difficult when multiple computers are using the same internet connection.If anybody wants PPPOE mode, they have to replace their MT 880 routers with utstarcom modems like UT300R2U or WA3002G4 adsl wireless routers. UT300R2U modem is available at Rs 1250, so it is better to buy it. PPPOE configuration is same in both UT300R2U and WA3002G4 modems. So I will explain it now for WA3002G4 model. It is same for UT300R2U model also.BSNL people will do Modem, splitter, phone line connections etc. They will connect the modem to your computer.Now open http://192.168.1.1 in internet explorer. It asks DSL Router's username and password. So enter admin as username and admin as password. Then it will display Device Info window as shown below.Click...
How to configure Linux machine as router?
2008-02-01 09:26:00 Here are some simple steps to do it, using Network Address Translation (NAT)Enable packet forwarding . Make it permanent by adding "net.ipv4.ip_forward = 1" to /etc/sysctl.confecho "1" > /proc/sys/net/ipv4/ip_forwardEn-able iptables to handle NAT. ( eth0 is the public connection )/sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADESave iptables settings service iptables saveDone. Check by routing table by verifying "netstat -nr" and iptables rules by "iptables -L"This is a simple method for Redhat Enterprise Linux. See iptables docs for more detailed info.
Configure the Open With menu with OpenExpert
2008-01-27 06:30:00 OpenExpert is an application that makes it easier for you to configure the Open With menu that you get when you right click on any file. Normally, under Windows the Open With menu provide you a list of application that you can use to open a particular file. If you want to open the file with another application not given on the list, you can click Choose Program and then use the desired program. You can also check "Always use this application" to make it the default program for that type of... ...
By: Instant Fundas
How to: configure VPN to work with iPhone
2008-01-26 03:56:00 iPhone World: The latest (January) v1.1.3 update of iPhone software allows iPhone users to benefit from VPN support. For VPN user authentication, iPhone supports RSA SecureID and CRYPTOCard for 2-factor token authentication, and password based MS-CHAP version 2. For machine authentication, iPhone and iPod touch support Shared Secret. For example if an ...
How to: configure VPN to work with iPhone
2008-01-26 03:56:00 iPhone World: The latest (January) v1.1.3 update of iPhone software allows iPhone users to benefit from VPN support. For VPN user authentication, iPhone supports RSA SecureID and CRYPTOCard for 2-factor token authentication, and password based MS-CHAP version 2. For machine authentication, iPhone and iPod touch support Shared Secret. For example if an ...
By: iPhone World
How to: configure VPN to work with iPhone
2008-01-26 03:56:00 Written by Krzysztof The latest (January) v1.1.3 update of iPhone software allows iPhone users to benefit from VPN support. For VPN user authentication, iPhone supports RSA SecureID and CRYPTOCard for 2-factor token authentication, and password based MS-CHAP version 2. For machine authentication, iPhone and iPod touch support Shared Secret. Original story at iPhone World . View our complete collection of news and blogs, plus related videos, photos and more at Boxxet for Apple iPhone.
How to Configure CGI Email
2008-01-25 12:07:00 How to set up CGI Email script? CGI EMail is a simple, easy-to-use script that takes the results of any form and sends them to you via e-mail. Because it is already installed, minimal configuration is required to successfully use the script. The following steps provide quick summarized instructions for CGI EMail. Be sure to read the CGI user guide for detailed instructions on using CGI EMail.To configure CGI EMail: 1. Create an HTML form with a number of named input fields. Refer to this page for more detailed information of the action component of the form. 2. Create an e-mail template (a .txt file) that displays the format in which you want your form information displayed in the e-mail. Make sure all your form name codes are one word and in square brackets []. 3. Upload the .txt and form files to your site. 4. Go to your cgi-bin directory and change the file permissions on cgiecho and cgie-mail to 755. 5. Test the script. The cgiecho script is designed for testing onli...
How to configure default Ctrl+Enter setting in Firefox
2008-01-09 05:07:00 I have told you guys about how to type web addresses more quickly. Ctrl+Enter will fill you up .com. But what if you access to .net site more often and you want to change the default Ctrl+Enter to automatically fill you up .net not .com. How can you do it? It's easy just download URL Suffix Add-ons for Firefox. After installing the Add-ons, go to Tools -->> Add-ons. And then Choose the URL Suffix and click on Options. You will see the URL suffix configuration dialog box as follow. See? You could even configure for Enter behaviour, not just Ctrl + Enter. But I find it quite annoyance as most of the websites I surf are end with various suffix.
By: Bridge to Nova
How To Configure Microsoft Outlook Express
2008-01-05 05:45:00 Apply these steps in your cPanel page.Because Microsoft Outlook Express is the most popular e-mail application available, you can automatically configure Outlook Express from CPanel. This saves time in manually configuring your e-mail application and avoids errors.Note: This will only work if you have Microsoft Outlook installed on your machine and are running any version of Windows.To automatically configure Outlook Express: Click on the Add/Remove Accounts link in the Mail area.Click on the Outlook (Express) AutoConfig link next to the required account. Read the message in the alert window and click on the OK button. You may need to repeat this step two or three times.Click on the Open this file from its current location radio button, and click on the OK button in the File Download window.Click on the Yes button in the Registry Editor window and repeat for the last window. Outlook Express has now been configured for this account. You need to repeat this process for as many accou...
What is Configure One Configurator Software?
2008-01-03 23:26:00 Configure One?s Concept? Product Configurator, a room layout software, is a web based product that allows manufacturing companies to get increased revenues and reduced costs at the same time. Because of its configuration simplicity and scalability based on the company?s industry and size, the Configure One?s Concept? Product Configurator can be quickly justified by any ...
How to configure Gmail IMAP for Iphone easily.
2007-12-31 22:32:00 Gmail is one of the most popular email services on the web, the technology being able to work with numerous email clients compatible with most operating systems. Google rolled out IMAP support which enables the consumers to control their account straight from the desktop.
By: TheTechPedia
Configure Google Sitemaps For Your Blog
2007-12-31 13:00:00 If you haven't configured a Google Sitemap for your blog, then you have no control over what the GoogleBot might pay attention to when it comes to your site, nor how often. This is just something that will work out better for your blog once it's done. Download the plug-in here and install and activate it as you would any other Wo5 Zoom(s)
Configure Your Mobile Phone As Wireless Modem
2007-12-29 01:40:00 I just managed to setup my 02 Xda Zinc 3G mobile phone as a modem to replace the 3G datacard that costs around USD300. By either utilizing Bluetooth pairing or USB synchronous cable between the mobile phone and laptop, I can access the Maxis 3G network and then browse the Internet Explorer contents on the laptop. Some of the steps mentioned below may vary based on different telcos and mobile phone models, but most of them are still applicable while setting it up as wireless modem.Step 1: Turn on Bluetooth at Your HandphoneAt your 3G enabled phone, go to Setting -> Menu -> Connections, then click on Bluetooth icon. Turn on Bluetooth, set phone’s visibility to “Show to all” and name “your phone’s name” at your preference.Step 2: Setup Bluetooth Device at Your LaptopClick on Start -> Control Panel -> Bluetooth Devices. Click on Add.. and a pop-up Add Bluetooth Device Wizard would displayed. Tick “My device is set up and ready to be found” checkbox and click Next. The wi...
How to configure D-Link DWL-2100AP as an AP Repeater
2007-12-17 17:29:00 I just complete the configuration for D-Link Xtreme G DI-624 as an Access Point and D-Link AirPlus Xtreme G DWL-2100AP as a AP Repeater. It took me sometime to make it work as I try a different setting to find out what's work and what's not. As for now, I'll stay with the configuration below. Configure D-Link Xtreme G DI-624 as an Access Point. This D-Link DI-624 come with 4 ethernet port,
By: any tips
How to Configure Gmail Account on Your N95 / N73 / N70 / N72 and other Noki
2007-12-17 09:55:00 Here is the short tutorial which allows your to configure Gmail Account on N95: (IMP: You must enable POP3 access of Gmail Account. Hint:Look inside Setting and POP forwarding Options on gmail web site) Open Messaging Application (Figure 1) Goto Mail box. It asks you No mailbox defined. Define now? Choose Yes (figure 2) Mailbox setup wizard will ... |
|
 |
|
 |
