Motorola CLIQ Promo material shown
2009-09-23 11:57:00 The guys over at tmotoday have managed to get hold of an exclusive ?brochure? on the Motorola CLIQ smartphone delivering quite a bit of information while advertising the Motorola CLIQ?s sleek sexiness. The Motorola CLIQ brochure explains briefly about the MotoBlur and tits main features such as ?Happenings,? and answers some questions your typical customer would ...
By: Phones Review
material science
2009-09-22 12:27:00 why carbon steel get corrosion whether stainless do not get corrode
Forge Material
2009-09-18 13:09:00 Hi guys, Can anyone tell me what is the difference between raw bar forged, raw forge shape and raw bar round i really confuse with the customer requirement on the material. hope someone can help me. thanks!
Ammonium Diuranate Tank Material
2009-09-17 22:39:00 Need recommendation for tank alloy material (or coating / lining for steel tank). API type, no pressure, cone bottom, agitated 85 RPM. Product SG = 1.8 ; ADU - Ammonium Diuranate http://en.wikipedia.org/wiki/Am-monium_diuranate Liquid with suspended solids, sandy to pebble
Reflective Material for Solar System
2009-09-15 09:15:00 i want thin reflective material for solar system
MATERIAL CLASS & SCHEDULE
2009-09-14 09:39:00 WHAT THE DIFFERENT BETWEEN MATERIAL CLASS AND SCHEDULED AND WHICH USING ONE INSTEAD OTHER?
Material Class and Schedule
2009-09-14 09:39:00 WHAT THE DIFFERENT BETWEEN MATERIAL CLASS AND SCHEDULED AND WHICH USING ONE INSTEAD OTHER?
Material Thickness and Rolling
2009-09-09 15:24:00 What is the alternate thickness of st37 or st44 to the thickness 25 mm of st 52-3 in rolling application.
What is A2 material?
2009-09-09 03:22:00 i did check in the web but yet to found the correct and the nearest answer. A2 is a steel but i need to know what gread is the equivalent of it.
Emperical Model for Compensation of Raw Material Batch-to-Batch Variation
2009-09-08 10:38:00 Hi, I am looking to develop an empirical model (either statistical or a Buckingham ∏ type model) for a suspension polymerization product that can be used to compensate for the batch-to-batch variation inherent in one of the raw materials. Ideally I would like to develop a model which wh
Why refigerant distributor from Brass material but not copper
2009-09-07 11:54:00 The present outdoor unit and/or an indoor unit of an air conditioner equipped with a heat exchanger having a plurality of refrigerant passages, and a refrigerant distributor system for use in same. Why the refrigerant distributor make from brass but not copper? Although the distributor is fitte
Material for Fuel Tank "rubber" Gasket
2009-09-01 10:39:00 The fuel inlet & outlet carrier plate at the top of the fuel tank has a rubber gasket 3mm thick sealing it. This gasket was supplied as "fuel resistant" but after less than 6 months and 2000kms the petrol has eaten the edge of the gasket and lumps have fallen off lodging in the fuel filter. What
Testing Stone as a Building Material
2009-09-01 09:19:00 what is the standerd testing phisical or chemical for using the stone as unloaded (like cover or decoration out side and inside the buildings) and what is the specification limit ?
Are all Dirigibles Fated by Hygroscopic Material Eventuality?
2009-08-31 09:16:00 Are dirigible airships always going to allow the content gas to be mixed with oxygen due to moisture intrusion as an eventual probability? Does this mean any dirigible airship requires a filtration system that removes moisture immediately or just sufficiently over an expected time?
Dirigibles and Hygroscopic Material Eventuality
2009-08-31 09:16:00 Are dirigible airships always going to allow the content gas to be mixed with oxygen due to moisture intrusion as an eventual probability? Does this mean any dirigible airship requires a filtration system that removes moisture immediately or just sufficiently over an expected time?
High Salinity Ground Water Material Selection for Pumps
2009-08-28 08:50:00 Hi, I'm trying to establish the best material selection for submersible pumps and associated pipework in an environemt which can be upto 35 degrees C with salinity levels up to 5 times greater than sea water. reaching peaks of 4000 on occassion. There would also be additional sewerage organ
Material for Evaporator and Condenser Coil
2009-08-20 17:01:00 Hey frnz, I wanted to know what is the material used for evaporator and condenser coil in refrigerator. And i also want to some of the selection criteria for material of evaporator and condenser coil Mansi
Matias Kupiainen: demo solo material
2009-08-16 10:55:00 In case you missed it, check out Matias Kupiainen's great playing This is a content summary only. Visit Truth In Shredding to find out more!
Choosing a Test Chamber Material
2009-08-12 15:12:00 What material can I use to isolate a test chamber that will run from -70°C to + 150°C? Chamber is in ambient temperature from 18 to 23 °C Chamber Free volumen is 700 x 900 x 300 mm. Thanks in advance
SA 537 M CL 1-Material properties
2009-08-08 17:16:00 Hi Friends, Can any one get me the material properties of SA 537 M CL 1....(Young's Modulus, Poisson's ratio, Conductivity, Thermal Expansion and maximum Allowable Stress) Thanks & Regards, Raja
Material Composition of ASTM A-537 cl-1
2009-08-08 06:49:00 what is the material composition of ASTM A-537 cl-1
Material for Acid Service
2009-08-06 11:35:00 Dear all, I want to know the best suitable material for pipe carrying Acid whose concentration varies from 98% concentration to lower Value ( Value i don't know. Let's take Case of 10 % concentration).
What's the Best Soundproof Material?
2009-08-05 15:03:00 i heard of stuff that is like wallboard but it is compressed paper. and i heard that was the best anyone know?
Equivalent Material to SA 203 E
2009-08-02 07:47:00 Dear All Members, I need some advice regarding matter below: I have vessel datasheet with design temperature is 120 degree C(max) and -90 degree C(min) SA 203 E. Unfortunately this material are not common used, so what is equivalent material able to stand with these both temperatur
Modal Analysis of a Layered Composite Material to Find Loss Factor/Modes
2009-07-31 21:10:00 I have to do Modal analysis to find the loss factor , natural frequency, damping characteristics of any layered composite beam in ansys.suggest me please which model is to be used and how modelling can be done in ansys.
difference in between material M.S(mild steel) andA105
2009-07-30 11:58:00 hi sir what is the difference in between material M.S(mild steel) andA105 and there cemical composition.
Material Mill Test Certificate
2009-07-28 18:48:00 i have be attack by my project engineer. the materials supplied by contractor for the gas header extension work were outsourced locally. the contractor could not get mill test certificate for them an beacause i have inspected visually and they are good condition and also meet piping Code accept
Active Thermitic Material Discovered in Dust from the 9/11 World Trade Cent
2009-07-28 03:49:00 Any thoughts on this: We have discovered distinctive red/gray chips in all the samples we have studied of the dust produced by the destruction of the World Trade Center. Examination of four of these samples, collected from separate sites, is reported in this paper. These red/gray chips sho
Active Thermitic Material Discovered in Dust from 9/11 at World Trade Cente
2009-07-28 03:49:00 Any thoughts on this: We have discovered distinctive red/gray chips in all the samples we have studied of the dust produced by the destruction of the World Trade Center. Examination of four of these samples, collected from separate sites, is reported in this paper. These red/gray chips
Pipe Material
2009-07-23 13:19:00 SIR i want to know what material of Construction i have to use for Steam line used in Steam assist Flare system near the Flare Tips Area.
Controlling The Electronic Surface Properties Of A Material
2009-07-20 18:02:00 From ScienceDaily: Latest Science News: Researchers in Switzerland have for the first time created thin films with controllable electronic properties. This discovery could have a large impact on future applications in sensors and computing. Read the whole article
Alternate Equivalent Material for 253MA
2009-07-17 13:50:00 In one of our waste heat recovery coils in Ammonia plant, ferrules fitted in tubesheet to support coils are of 253MA material. ( 5"NB, 3mmthk welded pipe ). Can any body suggest me FUNCTIONALLY EQUIVALENT alternate material FOR THE APPLICATION ? Operating temp. in the zone is 675 t
Is There Any Hazardous Material in Fuel Cell?
2009-07-16 06:44:00 Hi all Just curious, since fuel cell is catching on so fast. Is there any harzardous material created or required during the manufacturing of fuel cell? In fact, is there anything negative about fuel cell? Rgds Kean W
JOB VACANCY Building Material Company
2009-07-03 04:09:00 JOB VACANCY Building Material Company is seeking for suitable candidates to fill in the following positions of: Assist. Marketing Manager (AM) Qualification: D3 / S1 in any major, with minimum 3 years of experience Good communication and interpersonal skills Computer literate Excellent English both oral and written Marketing and Promotion (MP) Qualification: D3 / S1 in any major Good communication and interpersonal skills Excellent English ...
Material code
2009-06-27 09:05:00 AT Some place i found material specification is SA 516 GR 70N .Pl. explain me meaning of N ?
Shrinkage for BMC thermoset Material
2009-06-25 09:34:00 Could you please kindly let me know the shrinkage for BME thermoset material in injection molding process?We are heating the mold in 160degree&and barrel in 20 degree. Thanks
Marine Valves and Material Selection
2009-06-24 21:59:00 Working on a valve application for concentrated saltwater media. Seeking recommendations on construction materials (stainless, duplex, etc.).
What Property is Responsible for Two Strips of a Material Bonding After Rol
2009-06-24 10:22:00 We are hot-rolling two strips of aluminum together, but they do not bond. Any ideas? Thank you.
how to choose steel material for different application?
2009-06-22 16:59:00 what are the main factors involved in the steel material selection? how to optimize the material selection process? how much will be the influence of tensile strength values, hardness value and microstructure in the selection methods?how to find the correct balance of alloying elements of steel ma
Synthetic Diamonds: A Forgotten Material?
2009-06-22 13:00:00 Prior to the rise of carbon nanotubes, one of the most prominent topics in materials was the development of synthetic diamonds. These actual diamond-structure carbon crystals are formed in a lab, and are not to be confused with artificial gemstones such as cubic zirconia. They are also different fro
Crustacean Shell With Polyester Creates Mixed-fiber Material For Nerve Repa
2009-06-20 15:03:00 In the clothing industry it's common to mix natural and synthetic fibers. Take cotton and add polyester to make clothing that's soft, breathable and wrinkle free. Now researchers at the University... Extensive site includes news of various topics like Marine animals,Marine biology, sharks,Whales,sea mammals,endangered species,birds,turtles,penguine,-seal,planktons,Fish,coral reef,coastal environment and more
what material is equivalent material to
2009-06-20 11:52:00 hi what material is equivalent material to- 1) al cu mg1 f39. 2)al mg 4,5 mn. 3)s235jrg2. 4)st 37 k. thank u.
Material for Grinding Mill Rollers, Ring and Ploughs
2009-06-18 06:50:00 We are operating Vertical roller(pendulum type) grinding mill for grinding of Rock Phosphate to 150 Mesh. Life of the Rollers, rings and ploughs are very short. Life of Rollers and Ring is one month where as life of Ploughs are only 15 days. The material is maganes steel for all the parts. Can you
Green Heart Material
2009-06-16 13:51:00 Our customer needs the green heart products(bluetooth) ,and two choices of plastic materials are suggested : recycled plastic and boi-plastic. 1. requirement for recycled plastic The ratio of recycled material shall be to a minimum blend of 70% recycled material and 30% virgin bas
Plate Material and Mill Undertolerance
2009-06-16 11:20:00 Dear all.. Please help me to understand this following statement from ASME VIII-2 2007 Para 4.1.3.2. Mill Undertolerance. Plate material shall be ordered not thinner than the design thickness. Vessels made of plate furnished with an undertolerance of not more than the sm |
|
 |
|
 |
