|
Copper Tin Lead Plating?
2009-08-12 21:28:00 I am working on a reverse engineering project for a customer. The part is a gear bushing and has a Copper (73.841%) Tin (3.90%) Lead (21.60%) plating (the analysis says it is consistent with CU-116492). I am having difficulty finding a supplier (inside the US) who can do this type of plating. Any
Passivation on Electroless Nickel Plating
2009-07-27 04:12:00 Anyone can tell the passivation method/process/chemical (as a post treatment in plating process) after Electroless Nickel plating on Aluminium Die Casting parts with 5-8 microns. The purpose of this passivation is to improve the performance in Salt Spray/Mist Test.
Alternate to Cadmium Plating-2
2009-05-20 02:42:00 Hi all, I posted this question earlier in April this year and got good reponses with informative directions. Thank you guys! I have done extensive research and found 3 promising candidates: Electoless Ni plating, Xylan coating and Elctrolytic Al plating. All of them have good corossion
Alternate to Cadmium Plating
2009-04-20 20:17:00 Hi, I am doing a research on finding alternative platings that could replace Cadmuim plated fasteners, while the candidates need to be economically and technologically feasible for industrial uses. Cd as a hazardous material will be eventually pohibitted in the US. Many countries have banned th
Using Copper Plating as a Lubricant to Deep Draw CRS
2009-02-26 05:25:00 We have a government drawing that specifies to use AISI 1008 copper plated steel to form a small tube. I was told that this method was used in the 1940's to lubricate the metal to help draw the part. After the part is formed we have to strip off the copper and re-copper plate the part. That seems
plating a brazed brass-ss component
2008-10-21 15:57:00 I have a brass component (watch case center) with 4nos of SS (304 grade) inserts brazed on to it. The brazing is done by using a Ag-Cu-Zn-Sn Brazing paste from hilderbrand and passing the component through a furnace at 630 deg centigrade. Our Plating process is Nickel Electroplating followed by Ion
What spec should be on a print for chrome plating?
2008-09-19 17:56:00 I understand that just calling out chrome plating is not enough.(parts are .100 aluminum plates), want to look like a bumper. Polish #?, Front, edges?, etc.
plating thickness
2008-08-30 19:32:00 I am looking at a machined part drawing that has a callout for AMS-2482 C Type I black anodize to a thickness of 50.8 Micormeters. In all my years of machining I have never seen a thickness called out in micrometers. I have googled both the spec. and plating thicknesses and have not found anything
Plating Nickel on Chrome
2008-08-24 16:20:00 The instructions from Caswell Plating are limited as to bath temperatures--they give current density as 1amp per 15sq.in. when plating nickel to copper amp 1amp per 1sq.in. when plating chrome, but nothing about plating the nickel on chrome--I'm wondering if anyone would care to suggest bath tempera
Iron Plating
2008-07-27 00:45:00 Hi. I am trying to help someone to solve the following problem. It is a plating process to plate copper with iron. It is used in the arts, printmaking. Here is the problem. She set up a steel-facing unit 6 months ago and now have recently been experiencing problems in plating. She said: " We have a
Plating Compounds for High-Voltage Buses
2008-06-06 17:52:00 I need a list of compounds used for plating. ( for bus maintenance )
plating allowance for M10x1.5 external thread with zinc plating
2008-05-26 13:31:00 Dear sir we are face a problum in providing the allowance for plating on an M10x1.5 p external thread can you guide on this regord if you have any table for different size and thrad length please provided me the same
In-house plating
2008-05-16 16:23:00 I'm looking for a little feedback from anyone who has experience with the brush-on or dip plating kits from Caswell or Hunter Products. Looking to flash brass with nickel then plate with silver. I'm building small test fixtures for measuring resistance and need good physical contact points. We're bu
Chrome Plating of Small Parts
2008-05-09 14:45:00 A non-technical friend told me of a problem he has with trying to get small parts chrome plated for a reasonable price. He has a couple of old Wurlitzer juke boxes he is trying to restore and wants to rechrome some small parts (eg: coin slots, face plates, etc.). He has contacted a couple smal
Food Styling for Photographers
2008-05-05 22:54:00 If you’ve ever done any research into food photography and styling, then you know how few and far between the guides are. There are a couple of books that focus on lighting and some of the basics of photography when it comes to food… almost a laughable number given the overall quantities of books on ...
Apple MacBook Air Laptop gets 24kt gold plating: Damn it is ugly
2008-04-24 11:10:00 Now this Apple MacBook Air Laptop which has been customized may be loved or hated by you, personally we think it is ugly but hey what do we know. The Apple MacBook Air gets the 24kt gold plating treatment as you can see in the picture above. The people behind it are Computer Choppers, the Apple ...
By: Cheap Laptops
Hard plating
2008-04-13 12:32:00 we are searcing a hard coating for a steering pole. the mixer blend sands. the pole is chrome coated and wears every 2 months. you can reply directly to my mail address: danny@tec.co.il Thanks Danny Arbel Bimer engineering group
acid gold plating and PGC
2008-02-24 17:04:00 How does make a acid gold plate bath and make a potassium gold cynide.
Need assistance plating specification PFZnNi5-D
2008-01-17 16:05:00 Only references I'm able to find appear to be Chinese. Can anyone give me a 'Western Equivalent' process? I'm located in midwest region of North America. Thank you. milo
Checking Crome Plating Contamination
2007-12-18 07:09:00 Please send us procedure for checking crome plating tank contamination and alkali tank
Applications of Tin plating & silver plating.
2007-12-15 16:24:00 What are the specific applications of tin plating & silver plating?
IS for tin plating
2007-12-14 05:13:00 I am looking IS for tin plating. Please advice me for the same.
STW Flicker Challenge for October: Plate it Up!
2007-10-04 06:36:00 I had two different ideas for this month’s challenge. But an article on plating in today’s Seattle Times pre-empted them both, and inspired me to create this month’s Plate it Up! theme. The article is about transforming a boring plating into something that has more appeal. Despite the title of the piece, which implies that ...
Bonding Chrome Plating to Zinc Die Cast and Aluninum Die Cast
2007-09-26 19:14:00 I am wondering which material, Zinc Die Cast or Aluminum Die Cast, Chrome Plating would bound and adapt to better. Say if the part is going to be use...
silver plating
2007-09-07 11:18:00 We are manufacturing fixed & moving contacts for Contactors. The contact assy consists of Brazing of copper contact with silver button (Ag-...
OiL PRODUCTION: OPEC does not seem, at the moment, to be contemplating an [
2007-08-20 20:27:00 If no economic slowdown occurs and OPEC withholds extra supply, the price of Brent, Europe's benchmark blend, could rise to as much as $100 a barrel in the third quarter of next year, the center said.
By: ENERGY BLOG
OiL PRODUCTION: OPEC does not seem, at the moment, to be contemplating an i
2007-08-20 20:03:00 OPEC will probably decide against boosting oil... [[ This is a content summary only. Visit my website for full links, other content, and more! ]]
By: ENERGY BLOG
Veterans Contemplating Suicide...LISTEN UP!!
2007-07-31 08:54:00 Veteran Suicide Hot Line Established Thanks to Cassy for the email!!!Folks, to the left you will see a number to the newly established Veteran Suicide Hotline.Details:Share the Information with Veterans and their Families More Info Visit this page: http://capwiz.com/ncoausa/utr/1-/GYUBHMDUSU/GPKVHMDUWL/13295395-16] The Department of Veterans Affairs has established a Suicide Hot Line to ensure veterans with emotional crises have round-the-clock access to trained professionals. NCOA applauds this action with the regret that the Suicide Hot Line was not established sooner! The NCOA Executive Director for Government Affairs Richard Schneider stated that veterans seeking professional mental health services must be taken care of 24/7(any hour of the day or night).Secretary of Veterans Affairs Jim Nicholson wants every veteran and their family members to know that VA Mental Health Professionals are just a phone call away and that ...
Surface Treatment: Nickel Plating Tubes
2007-07-12 11:45:00 How to perform nickle(Ni) plating inside of a dia 35 mm tube. What are the methods & what parameters required for Ni plating ? How t...
342. Bright Idea: RePlating
2007-06-13 17:09:00 Don’t let your restaurant leftovers go to waste; feed the hungry with them instead. Just place your doggie bag/box on top of any trash can (especially those designated as a Replate area with the sticker). This idea will work until more homeless folk start congregating outside fancy restaurants. At that point, those very restaurants ...
Plating Available Runners
2007-05-10 01:46:00 This week's Stats Geek article mentioned that the Pirates had to be creative to win. That's very true. He also said:"Let's start with the bats, or lack thereof. The Pirates have shown about four-fifths the offense of the average NL team (leading some fans to compensate by opening a fifth before each telecast.) The league averages 4.44 runs per game, the Pirates 3.47. [L]et's break down [the Pirates] with a stat that takes in about every batting outcome. "Runs Created".And he lost me right there. Why? Because, Runs Created doesn't compare apples to apples until the end of the year, and even then it is still biased some. Consider this -- the Pirates have played 13 home games at PNC that has an early year park factor of 0.859 runs -- 7th lowest in baseball. While one could argue that the park factor is low because the team isn't scoring runs, historically PNC Park is a pitcher's park. As an example, even in 2003 when the Pirates raked 753 runs for the year - 3rd ...
By: The RotoFeed
Sonics? owner contemplating Las Vegas
2007-04-28 01:04:00 Seattle SuperSonics owner Clay Bennett has told city business and civic leaders that Las Vegas, not his home town of Oklahoma City, could be a destination for the team, The Seattle Times reported. More: continued here
Possible reasons for problem with silver plating on copper component
2007-04-27 14:36:00 We are facing some problem with silver plating on copper component. For silver plating first the component is dipped in AgCN for adding s...
Chrome Nickel Plating - but not for bikes anymore.
2007-04-06 21:57:00 This just in from a reader: Chrome Nickel Plating, the company that plated "Vivian", is no longer working on bicycles. It is a mystery as.... Posted on 04/03/07 at 01:43 PM
By: Bicycle Fixation
Contemplating..
2007-03-24 17:00:00 ما سر الحل-575; فيها غلاه-575;كأن العذ-576; لا يأتي سواه-575;و سحر البد-585; لا يخفي سهاه-575;إذا ما شعت الأن-608;ار يومً-575;ترى نور الهو-609;...
Is Zambia contemplating military action to rescue Zimbabwe
2007-03-24 06:19:00 Is Zambia contemplating military action to rescue Zimbabwe International condemnation intensify over Mugabe’s brutal rule Amin George Forji With the humanitarian and political situation in Zimbabwe deteriorating from bad to worse on a daily basis, the African Union and Southern African countries who have since kept a tradition of silence on the matter, have now began coming out ...
Contemplating the Academy Awards Ceremony
2007-02-26 19:44:00 I know, you’ve been just dying to find out and so I’m here to tell you. Yes, I watched the Oscars last night. I did. I enjoyed it, particularly when I fell asleep at midnight and the show was still going on (hey, I had to get up and go to work this morning). But, no, I’m not being tongue-in-cheek or sarcastic, I did enjoy the show. I thought Ellen was really, really funny and despite the ridiculous number of montages and stuff I didn’t need to exist as a part of the show, Ellen was able to keep me from turning the channel. I like that Ellen.Did Ellen make a mistake and say Penelope Cruz was from Mexico? I’m not sure, it went by too quickly for me to say definitively. The upside of it was though that Ellen came out to clear up any misunderstanding and Penelope got more screen time, and that’s really all the upside anyone could ever ask for.And, Ellen in the audience? Great stuff. Her with ...
Salman Khan Contemplating Marriage And Holding An Painting Exhibition!
2007-02-15 22:28:02 The Bad Boy (ok man) of Bollywood may finally just settle down! Salman Khan was in Delhi recently talked about Marriage however as usual ignored questions about current flame Katrina Kaif.When the actor was asked about any marriage plans, Salman said, "Whenever He will give consent, I'll get married. Things are not in my hand. Without His will, nothing happens."When a journo hinted a tinge of sadness in his tone, this is what the Topless Tornado had to say:"There is nothing like that. I believe that He controls all of man's decisions. I'm also waiting for his signal."On His Films:"I'll soon be doing an action film which will be a complete departure from my romantic image," he said, adding he was considering five to six scripts and would decide on them soon. , "I will continue to act as long as my fans want me to. Their happiness is everything for me."On The Khan Monopoly:"I don't think that only the Khans d...
By: Our Bollywood
Wire Plating...? Applications.
2007-02-13 00:38:01 Hello all, I have a question regarding wire plating and their applications. What is the difference btwn tinned plated copper wire and nickel p...
The Metal Plating Bible!
2007-01-02 08:01:00 The Metal Plating Bible! ...High Conversions Off Targeted Traffic - Great Niche With Little Competition.
Reverse Current Progress in Electroplating
2006-12-11 22:30:03 What is reverse current progress in electroplating?
Removing gold plating from bus bars
2006-11-30 12:54:03 How can I reclaim the gold from gold-plated communication bus bars?It is 24 carat gold, and the bars were once used for a pbx system in the 1960's whe...
Electroless Nickel Plating Thickness
2006-11-29 00:42:04 What is the recommended/allowable thickness for Electroless Nickel Plating for corrosion resistance? Can anyone recommend anything other than Mil-Spe...
Copper Plating Glass
2006-10-24 03:36:03 I have been using 1/4" peach mirror for several years and it seems to be getting hard to find. Originally, this would have been made by copper plating... |
|
 |
|
 |
