|
Prism - Occasionally Connected?
2008-06-09 14:46:00 Prism, AKA Composite Application Guidance + Composite Application Library, is rolling towards a release. I’ve been talking with Glenn Block quite a bit about Prism, and am even on the advisory board (what were they thinking?). One of the topics not covered by Prism is occasional connectivity, and I would like to say a word or ...
Prism - Occasionally Connected?
2008-06-09 14:46:00 Prism, AKA Composite Application Guidance + Composite Application Library, is rolling towards a release. I’ve been talking with Glenn Block quite a bit about Prism, and am even on the advisory board (what were they thinking?). One of the topics not covered by Prism is occasional connectivity, and I would like to say a word or ...
* Master Managed Threading and Synchronization Techniques
2008-04-29 18:18:00 Check out my latest article on Devx.com. It starts from the basics of Threading & Thread Management, and dives deep into various synchronization techniques available in .NET framework which includes inter-thread and inter-process synchronization. The synchronization techniques discussed are: ? Locks / Monitors ? Mutex ? Interlocked ? Read-Writer Locks ? Semaphores ? EventWaitHandle Master Managed Threading and Synchronization Techniques
WCF, Smart Clients, and Deadlocks
2008-04-11 11:15:00 There’s a new article up on MSDN describing how to write Smart Clients using WCF. The author is none other than WCF-Master Lowy and he goes over the multitude of ways you can deadlock yourself. Here’s a taste: UI Thread and Concurrency Management Whenever you use hosting on the UI thread, deadlocks are possible. For example, the following ...
WCF, Smart Clients, and Deadlocks
2008-04-11 11:15:00 There’s a new article up on MSDN describing how to write Smart Clients using WCF. The author is none other than WCF-Master Lowy and he goes over the multitude of ways you can deadlock yourself. Here’s a taste: UI Thread and Concurrency Management Whenever you use hosting on the UI thread, deadlocks are possible. For example, the following ...
Beauty By Josi: My AHA! Moment...Eyebrow Threading!!
2008-04-09 21:00:00 Okay first off...why didn't anyone ever tell me that when I hit 30 that I would start growing a mustache? And why didn't they tell me that since I would be using Retin-A and other heavy duty lotions and potions...
By: TheMakeupGirl
free eyebrow threading Culver City, CA 4/2-3
2008-04-03 01:43:00 Rating: 0 Posted By: honeybee Views: 87 Replies: 0 A new threading salon in Culver City is giving free eyebrow threading for their grand opening today Wednesday, & Thursday (April 2 & 3). The salon is called WOW Beauty Center they are at 10836 Washington Blvd, next door to the Sensitive Baker.(Threading is like waxing or tweezing, but they use thread instead.)More Online Coupons from Fatwallet.com.
Hair Threading As A Hair Removal Technique
2008-03-19 05:16:00 Hair threading is becoming more and more popular as individuals search for a new way to remove hair. The process can be done at home if you would like to or you can get a much better procedure done through a salon. For those that are looking for a new method of hair removal, besides all the waxing and the shaving, hair threading may be the answer for you. Although it is about as painful as waxing, it can help to remove the fine hair that grows over your body. You will use normal sewing thread... [[ This is a content summary only. Visit my website for full links, other content, and more! ]]
Threading Diagram Pfaff 774 Hobbylock
2008-03-19 05:09:00 How do I thread this Sewing machine?
By: Fixya.com
Threading bobbin
2008-03-18 23:21:00 I have a Kenmore model 158, How come I can't get my bobbin thread to go on even when I am adding thread to my bobbin. I do not have a manual left. It is a old machine but I have forgotten what I need to do. I think I have it threaded correctly. Help...
By: Fixya.com
Questions on threading of reinforcing bar
2008-02-27 17:49:00 Hi! I'm helping a friend with a manufacturing problem. He has to put 24" of 1" NC left hand thread on many thousands of pieces of 1" rebar. It is for some kind of rock bolt in the mining industry. He is using a lathe for the rotary drive and using a floating die head with four individual thre
Hair Removal: Threading, Friction and Epilators
2007-12-28 04:15:00 Friction, Threading and the use of rotating epilators are other methods of hair removal.Friction - Friction is not a very popular method of hair removal although some people find it effective on fine hairs of the legs and arms. In this method, a rough surface, like a mitt or a pumice stone, is used to rub away hair on the skin's surface. A mitt with rough strips on a smooth surface is often used. Friction is inexpensive, fast, basically painless and can be done at home. This also exfoliates and smoothes the skin. Most say this method is good for fine hair on the legs while others use it between shaving or waxing sessions. The effects last a short time, a few hours to a few days and a pigmented area often called the dark 'shadow' is often visible. This can also cause skin irritation if rubbed too hard and is not for use on sensitive areas like the face, arms or bikini area.Threading (Khite) - This method is called khite in Arabic and fatlah in Egyptian. It's not a commonly used m...
What Makes Smart Clients Safe?
2007-12-26 08:42:00 After my recent post on using AOP for smart client development, my partner-in-crime, Arnon, suggested I explain a little bit more on the whole issue of multi-threading in the UI. This isn’t going to be another tired explanation of how you should only update controls on the main thread. This is going to be ...
What Makes Smart Clients Safe?
2007-12-26 08:42:00 After my recent post on using AOP for smart client development, my partner-in-crime, Arnon, suggested I explain a little bit more on the whole issue of multi-threading in the UI. This isn’t going to be another tired explanation of how you should only update controls on the main thread. This is going to be ...
Handling messages out of order
2007-12-16 00:22:00 I wanted to follow up on my recent post, “In order messaging a myth?” by showing the exact code that solves the issue. I have a podcast waiting to come online that deals with the specifics, so keep your eye out for that too. The important thing to note is that if we just automatically return ...
Handling messages out of order
2007-12-16 00:22:00 I wanted to follow up on my recent post, “In order messaging a myth?” by showing the exact code that solves the issue. I have a podcast waiting to come online that deals with the specifics, so keep your eye out for that too. The important thing to note is that if we just automatically return ...
Eureka! AOP is the final piece of the multi-threaded smart client puzzle
2007-12-08 00:01:00 If you’ve read my recent post on the threading issues I’ve been dealing with in Smart Client Applications, then you’re probably beginning to get the picture that its fairly complex. To tell you the truth, it is. And up until this point I haven’t been able to find anything that’ll help - and that includes ...
Eureka! AOP is the final piece of the multi-threaded smart client puzzle
2007-12-08 00:01:00 If you’ve read my recent post on the threading issues I’ve been dealing with in Smart Client Applications, then you’re probably beginning to get the picture that its fairly complex. To tell you the truth, it is. And up until this point I haven’t been able to find anything that’ll help - and that includes ...
Object Builder - the place to fix system-wide threading bugs
2007-12-06 11:38:00 Last week I was at a client in their test lab and saw a strange bit of behavior. The system could be described as something like an air traffic control system, showing things moving around on a map. For just a second, a fraction of a second, one of the “planes” disappeared from the map ...
Object Builder - the place to fix system-wide threading bugs
2007-12-06 11:38:00 Last week I was at a client in their test lab and saw a strange bit of behavior. The system could be described as something like an air traffic control system, showing things moving around on a map. For just a second, a fraction of a second, one of the “planes” disappeared from the map ...
Convert Between Synchronous and Asynchronous
2007-11-19 19:25:00 When a program calls a synchronous function, the program halts and waits for the function to finish executing. When a program calls an asynchronous function, the program does not wait and continues to execute while the asynchronous function executes in the background. By default, C# methods are synchronous. Externa-l functions that can take a long time to ...
[Podcast] Thread-Safe Asynchronous Smart Clients
2007-10-12 09:08:00 In this podcast we’ll look at various patterns involved in creating MVC-based Smart Clients which communicate using asynchronous messaging and how to avoid threading problems there. Neil asks: Hi Udi, We’re building a smart client application that uses WCF for full-duplex communications with our server. This is the asynchronous communication you talk about in your podcast. The ...
[Podcast] Thread-Safe Asynchronous Smart Clients
2007-10-12 09:08:00 In this podcast we’ll look at various patterns involved in creating MVC-based Smart Clients which communicate using asynchronous messaging and how to avoid threading problems there. Neil asks: Hi Udi, We’re building a smart client application that uses WCF for full-duplex communications with our server. This is the asynchronous communication you talk about in your podcast. The ...
ObjectBuilder synchronization features needed for pub/sub-ing Smart Clients
2007-09-28 23:36:00 I’ve been getting some questions from the Dependency Injection folks out there as to why I have my own Object Builder wrapping the framework. There are two very good reasons why I do this: The first is to insulate the framework and application code that I write from the choice of one dependency injection technology or ...
ObjectBuilder synchronization features needed for pub/sub-ing Smart Clients
2007-09-28 23:36:00 I’ve been getting some questions from the Dependency Injection folks out there as to why I have my own Object Builder wrapping the framework. There are two very good reasons why I do this: The first is to insulate the framework and application code that I write from the choice of one dependency injection technology or ...
Fetching Strategy NHibernate Implementation Available
2007-09-17 02:54:00 A couple of months ago I put out a post discussing one way to implement custom fetching strategies. Anyway, I finally got around to putting my money where my mouth was… So, I’ve implemented the pattern in NHibernate, adding the following method to ISession: T Create<T>(); As well as adding the following interface to the NHibernate package: ...
Fetching Strategy NHibernate Implementation Available
2007-09-17 02:54:00 A couple of months ago I put out a post discussing one way to implement custom fetching strategies. Anyway, I finally got around to putting my money where my mouth was… So, I’ve implemented the pattern in NHibernate, adding the following method to ISession: T Create<T>(); As well as adding the following interface to the NHibernate package: ...
Threading Standard
2007-09-15 11:00:00 Hi can any arrange the detail of UNC thread? How can I decide the drill sizes in mm for that type thread ? Regards, Ram
Get Rid of Unibrows with Threading
2007-08-21 06:35:00 Tired of having a unibrow growing over your eyes? If you are a man who likes to take charge, you may have already tried some alternatives to get rid of that unibrow: shaving, tweezers or wax, right? However, there?s another method that is becoming popular thanks to its advantages: Threading. Threading is nothing new, ...
Performant and Explicit Domain Models
2007-06-04 22:31:00 Some Technical Difficulties Ayende and I had an email conversation that started with me asking what would happen if I added an Order to a Customer?s “Orders” collection, when that collection was lazy loaded. My question was whether the addition of an element would result in NHibernate hitting the database to fill that collection. His answer ...
GAS CYLINDER THREADING.
2007-05-20 17:09:00 HI, CUSTOMER ASK FOR 1/2" GAS CYL.THDS. IN FLANGE. I DO NOT KNOW ABOUT " GAS CLY.THD.". ARE IT IS METRIC FORM ie, 60 D...
Multi-core CPU utilization with the Bus API
2007-05-12 00:59:00 The issue of efficiently utilizing multi-core CPUs is gaining wider and wider mindshare. The debate on whether to use threads or processes is heating up. Savas is coming at it from the parallelism angle and I think that I’m with him on this. When I base my designs around the Bus API, all my logic is ...
Threading by the fine line of cautiousness
2007-05-10 16:57:00 After a splendid opening on Monday where we opened into virgin land only to close lower and Tuesday echoed. All these despite US breaking new high after high, we seem to have dislodge from the association with Dow Jones. STI has now covered all the gaps created last week and this is healthy! It found gap support at 3409 thereabouts. Come to think of it, the cycle was pretty obvious, sector by sector they took turns to rally. We had banking shares then followed by offshore and constructions. So far property seems to be neglected. As for Tech sector, wait for next reincarnation....they never fails to disappoint.Every rally attempt so far has been muted. I think all thanks to the forums and newspapers that most of the people are very wary of what can happen in May. They are right, we are scaling at such dizzying height and anytime if any market trips, it can lead to global panic selling and thus creating a self fulfilled prophecy of "see i told you so, May confirm tua lao". Th...
Indian Americans' threading salons face legal hurdle
2007-03-19 06:03:00 New York, March 19: California regulators and lawmakers will soon have to decide whether threading, a hair removal technique mostly practised by immigrant Indian American women, should be exempted from state cosmetology regulations that protect consumers.
By: newkerala.com
?CORE JAVA? JAVA Multithreading
2007-02-21 09:08:03 Qualification :Highest - MCA/PGDCA, ME/M.Tech (Computers )2nd Highest - BE/B.Tech (Agriculture, Computers)Experience : 4 -8Level : Middle - Manager, Assistant ManagerLocation : Bangalore, GurgaonJOB DESCRIPTION :Key Skills :* Knowledge of multiple technologies & proven expertise in at 2-3 technologies including* but not limited to J2EE, .NET, HTML, DHTML, XML, SOAP, JavaScript, Java, Visual Basic, Visual Basic.NET, PL/SQL, C/C++, C#, Perl, TCL, RDBMS, CORBA, COM/DCOM.CONTACT INFORMATION :Email Id : ayesha@iquest-consultants.comPh-one No. : 02026851932/42 Ext 28
Missing The Boat On Multithreading?
2006-12-12 10:31:02 From TechWeb: It's been 18 months since Intel introduced the first dual-core desktop processor, but only a handful of ISVs have...
Dermatologists recommend threading over waxing
2006-10-17 20:42:02 Threading is an ancient facial hair removal technique which removes hair from the roots. The technique which has originated from Asia is now getting popular in big cities again. This technique works all over the face like on the eyebrows, lips, chin and cheeks. Threading also benefits the skin by exfoliating and massaging, and over a time the facial hair becomes softer and in some cases some clients will have less hair. Many dermatologists and plastic surgeons are recommending their clients to choose threading over waxing. Waxing can cause the skin to stretch, whereas threading pushes the skin instead of pulling it. Highlights of Threading hair removal technique a. The procedure lasts for six to eight weeks b. The process involves splashing baby powder on the face to make the hair move visible and then uses a white cotton thread. c. The cost of threading on various parts is Brows - $15, Lip area - $15, Cheeks - $20, Chin - $15, Full face - $55 Read
Extreme Multiple Threading and Dominant Rhythm
0000-00-00 00:00:00 Sparky - As beginners when we think about building attraction through verbal game, the first thing that comes to mind is Power Lines, Negs, or magic pills/bullets/routines. We all have them, use them, and love them. Now, there's a very right way to deliver these, and a very wrong way. Lets start with a good delivery...
How To Load Laminating Film On Your Laminator Without A Threading Card
0000-00-00 00:00:00 If you are looking to load new laminating film onto your laminator and still have a little bit of film left there is a way to use the remaining film to help you load new laminate onto your machine This article describes how to use the existing film that is already loaded on your roll laminator in place of a laminating film threading card
By: eArticle Submit
|
|
 |
|
 |
